That's
not carbide, its Kryptonite!
Milling 8620 on a 7HP lathe. 1" diameter Z-Carb
pocket was 1" axial depth; radial depth 1,000 RPM 10 IPM
normally 5 parts w/ Hanita rougher @4 IPM & 600 RPM . Z-Carb
ran 19 parts!
I believe in the Z-Carb!
This from a New York state distributor (after a Saturday shop visit where his customer used the Z-Carb to cut machining time down 90% and the shop owner told the tool crib attendant to ONLY order Z-Carb.
SGS Tool Company is a proud member of:
