Our customers tell the
tale...
No one understands the cost-saving benefits of SGS Solid Carbide Rotary Cutting Tools than our customers. They buy SGS time and time again because SGS increases productivity and reduces costs. Read on to see how.
Click here to submit your own testimonial!
That's not carbide, it's Kryptonite!
This report came from a Haas Associate in California (after testing on a 7 HP Haas Lathe with the following parameters): Material: 8620 •
Tool: 1” diameter Z-Carb. And the results: Pocket was 1” axial depth and ½” radial depth at 1,000 RPM and 10 IPM. A competitive rougher ran 5 parts @ 4 IPM & 600 RPM. The Z-Carb ran 19 parts!
I believe in the Z-Carb!
This from a New York state distributor (after a Saturday shop visit where his customer used the Z-Carb to cut machining time down 90% and the shop owner told the tool crib attendant to ONLY order Z-Carb.)
We just received a 60 piece Z-Carb order from our customer, who said that they were redesigning their machine fixtures and vises so that they can withstand the high feed rates of Z-Carb.
This from a New York state distributor whose end-user customer reduced their cycle time to just 35 minutes by slotting with a ¾” Z-Carb in Hastalloy B2. The depth of cut was .600!
My end-user was 'high-fiving' me as he thanked me for introducing Z-Carb!
This from a Pennsylvania distributor after another successful test with the following parameters: Material: Hastalloy • Tool: ¼” Z-Carb with 3/16” depth of cut. And the results: The Z-Carb was tested against a competitive tool by running at 1250 RPM and 6 IPM. The competitive tool lasted for only 6 parts with a 4 minute cycle time. The Z-Carb lasted for 20 parts and cycle time was 1:28 seconds.
